5 Micron PFAS Reduction Carbon Block Filter — 20″ × 4.5″
Target PFAS as you refresh your carbon stage.
Replace the carbon stage in your compatible 20″ × 4.5″ housing with the tested PFAS reduction cartridge. It also helps reduce chlorine taste and odour.
Testing reported 97.4% PFAS, 96.5% PFOS, 98.5% VOC and 97.8% chloroform reduction under test conditions. Performance varies with water quality and use.
Measure these two.
Measure the cartridge you're replacing, not its housing.
Will it fit?
Match the 20″ × 4.5″ format.
Compare your current cartridge’s overall length, widest diameter and end seals. 20″ × 4.5″ is a nominal format, so check the cartridge itself before ordering.
Measured it and still not sure?
Send a photo of the cartridge beside a tape measure and we'll tell you which size it is.
Call 1300 264 173 or email sales@homefiltrationsystems.com.
Nominal sizes vary a little between makers, so match the measurement rather than the label. What we can't tell you is how ours compares to a cartridge we didn't make and haven't tested, or whether a replacement affects your housing's own warranty; that one is between you and its manufacturer.
Fitting it, and what comes out
Cartridge installation and replacement guide
Follow the instructions for your existing system.
Need help with the change? Call 1300 264 173.
What happens, in order
-
Isolate & release pressureShut off or bypass the supply. Release pressure.
-
Replace the cartridgeFit the matched cartridge. Check and lubricate seals as directed.
-
Flush & checkRestore slowly. Flush as directed and check for leaks.
-
Record the changeRecord the date. Check cartridge condition and flow regularly.
Reviews
What people who fitted it said.
Only buyers we can match to an order can leave one, so the count is lower than it would be otherwise.