Pleated Sediment & Nano-Silver Carbon Pack — 20″ × 4.5″
Catch sediment. Refresh the taste of your water.
Refresh two working stages with one matched 20″ × 4.5″ replacement pack. A pleated sediment cartridge handles incoming particles, while nano-silver carbon helps reduce chlorine taste and unwanted odour.
Who this pack is for
On tank water? Time for fresh filters.
When did you last replace your filters? A fresh set helps restore better taste, reduce chlorine smell and keep scale more manageable.
Replace cartridges every 6–12 months, depending on water quality and use. Check sooner if flow drops or taste and odour return. Follow your UV unit’s separate lamp-replacement schedule.
Particles in the incoming water
The pleated cartridge catches dirt, rust and sand before water reaches the carbon stage.
Silver protection
Nano-silver technology helps inhibit bacterial growth within the filter media alongside fine particulate filtration.
For the extra function in your carbon stage.
What's in the pack
What arrives in your replacement pack.
Stage 01Pleated Sediment Replacement Filter — 20″ × 4.5″, 5 Micron
The pleated sediment cartridge catches sand, dirt and rust before the finer stages.
Stage 021 Micron Nano-silver Carbon Block Filter — 20″ × 4.5″
Carbon helps reduce chlorine taste and odour. Its 1 micron rating captures fine particles, while nano silver helps inhibit bacterial growth in the filter media.
Measure these two.
Measure the cartridge you're replacing, not its housing.
Will it fit?
Match the cartridge format and the working parts.
Compare your current filters’ length, diameter, end openings and seals. A matching nominal size is a starting point; confirm the complete fit with HFS before ordering.
Measured it and still not sure?
Send a photo of the cartridge beside a tape measure and we'll tell you which size it is.
Call 1300 264 173 or email sales@homefiltrationsystems.com.
Nominal sizes vary a little between makers, so match the measurement rather than the label. What we can't tell you is how ours compares to a cartridge we didn't make and haven't tested, or whether a replacement affects your housing's own warranty; that one is between you and its manufacturer.
Fitting it, what comes out, and when it's due again
A straightforward cartridge change, with the right fit.
Need help with the change? Call 1300 264 173.
What happens, in order
-
Identify & isolateCheck the exact replacements against your system guide. Isolate water, release pressure.
-
Remove & inspectRemove the old cartridges. Clean the housings and check seals.
-
Fit the matched partsSeat each cartridge in its specified position. Check openings and O-rings before refitting the bowls.
-
Restore, flush & checkRestore supply as directed, flush the cartridges and inspect for leaks. Record the change date.
Reviews
What people who fitted it said.
Only buyers we can match to an order can leave one, so the count is lower than it would be otherwise.