Pleated Sediment Replacement Filter — 20″ × 4.5″, 5 Micron
Refresh your first line of sediment filtration.
Replace the pleated sediment stage in your compatible 20″ × 4.5″ housing. This 5-micron nominal cartridge catches dirt, rust and other particles before they reach downstream filters and fittings.
Measure these two.
Measure the cartridge you're replacing, not its housing.
Will it fit?
Match the cartridge format and the working parts.
Compare your current filters’ length, diameter, end openings and seals. A matching nominal size is a starting point; confirm the complete fit with HFS before ordering.
Measured it and still not sure?
Send a photo of the cartridge beside a tape measure and we'll tell you which size it is.
Call 1300 264 173 or email sales@homefiltrationsystems.com.
Nominal sizes vary a little between makers, so match the measurement rather than the label. What we can't tell you is how ours compares to a cartridge we didn't make and haven't tested, or whether a replacement affects your housing's own warranty; that one is between you and its manufacturer.
Fitting it, and what comes out
A straightforward cartridge change, with the right fit.
Need help with the change? Call 1300 264 173.
What happens, in order
-
Identify & isolateCheck the exact replacements against your system guide. Isolate water, release pressure.
-
Remove & inspectRemove the old cartridges. Clean the housings and check seals.
-
Fit the matched partsSeat each cartridge in its specified position. Check openings and O-rings before refitting the bowls.
-
Restore, flush & checkRestore supply as directed, flush the cartridges and inspect for leaks. Record the change date.
Reviews
What people who fitted it said.
Only buyers we can match to an order can leave one, so the count is lower than it would be otherwise.